---
title: How to set up the VET Checklist
description: "The **VET Checklist** is a report that shows which cows need to be checked for health or reproductive problems. You can set up this list and select the reasons why you want a cow to appear on it. The **VET…"
url: "https://www.uniform-agri.com/knowledge-base/myherd-dairy/action-lists-protocols/how-to-set-up-the-vet-checklist/"
updated: "2026-11-18"
category: "Action lists & protocols"
tags:
  - Academy v6
---

# How to set up the VET Checklist

The **VET Checklist** is a report that shows which cows need to be checked for health or reproductive problems. You can set up this list and select the reasons why you want a cow to appear on it. The **VET Checklist** can be found under **Management → Special Reports → VET Checklist**.

## Checklist

The **VET Checklist** shows all the necessary information about an animal that needs to be checked by the vet.

An animal appears on the list for a specific reason. This can be a pregnancy check, no observed heat in the current lactation, a health recheck or one of the other 14 reasons.

[![](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-1.png)](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-1.png)

## Reasons

There are three groups of reasons (**Heat & Fertility**, **Pregnancy Check** and **Protocol & Health**). The reasons in each group are explained below. You can adjust each selected reason to suit your needs.

## Heat & Fertility

- **NOHEAT** — Cows not seen in heat after a specific number of days after calving will appear on the list.
- **NOHEAT YS** — Young stock not seen in heat or inseminated after a specific number of days after birth will appear on the list.
- **NOTINS** — Cows not inseminated after a specific number of days after calving will appear on the list.
- **NOTINS YS** — Young stock not inseminated after a specific number of days after birth will appear on the list.
- **SHRTCYC** — Calved animals that showed several heats within a short period will appear on the list. You can set the number of days.
- **RE-INS** — Animals that have been served more than a specific number of times will appear on the list.
- **ABORTED** — Animals that have aborted will appear on the list.

## Pregnancy Check

- **PCHK** — Served animals without a pregnancy result after a specific number of days will appear on the list.
- **RECHKPD** — Animals with an uncertain pregnancy diagnosis will appear on the list if they still have no positive pregnancy result after a specific number of days.
- **PD-** — Calved animals with a negative pregnancy result will appear on the list.
- **PD- NOHT** — Calved animals with a negative pregnancy result that have not been seen in heat or inseminated after a specific number of days will appear on the list.

## Protocol & Health

- **HLTHCHK** — Animals with recent or current health issues or treatments specified for the **VET Checklist** will appear on the list.
- **CALVCHK** — All calved animals will appear on the list after a specific number of days.
- **POSTNCHK** — Calved animals will appear on the list after a specific number of days and before their first insemination after calving.
- **INDRECHK** — Check all animals that have an individual check date.
- **PROTOCOL** — Check animals due for a check-up set up in a protocol.

## Properties

When you open **[Properties]**, there are three tabs. The first tab is **Filter**.

On the **[Filter]** tab, you can include or exclude animals in three ways. Under **Groups**, you can filter by feeding group. Under **Animal type**, you can select **[Dairy cows]**, **[Beef cows]**, **[Beef bulls]**, **[Breeding bulls]** and **[Calves to sell]**. Under **Status**, you can select **[Cows]**, **[Young stock]** or both.

[![](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-2.png)](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-2.png)

On the **[General]** tab, you can set the different reasons. For each reason, set a parameter on the right. In the example below, **[Use Pregnancy Check Settings from General Settings]** is selected for **PCHK** (pregnancy check).

The default for each parameter is shown in parentheses.

[![](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-3.png)](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-3.png)

On the **[Display]** tab, you can set optional columns. Drag items from the **Available** list on the left to the right. Some items have extra settings, as shown below for the **Comments** column.

[![](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-4.png)](https://www.uniform-agri.com/wp-content/uploads/2026/11/set-up-vet-checklist-4.png)

## Presets

You can create different presets for the **VET Checklist**. These are settings you can save and use again. You can create different lists for different reasons or types of animals.

To save a preset, click the save-as icon ![](blob:https://www.uniform-agri.com/584446b7-f84c-47f9-8efe-3f6aa81fc05e). Give it a name.

When you make a change and want to save it, use the save icon ![](blob:https://www.uniform-agri.com/d91ac30c-cc1a-465b-a921-e6bed9485504).

To delete a preset, use the delete icon ![](blob:https://www.uniform-agri.com/2c455422-0509-4fd5-ac76-e15c5e7d592f).

Use the dropdown menu ![](blob:https://www.uniform-agri.com/d206ba9e-e1d4-4b92-b3b8-1bb9bc22a8bf) to open your previously saved lists.
